Clearance Adjustable Book Protection Jackets - Pack of 10 PP192B2

More Views

Clearance Adjustable Book Protection Jackets - Pack of 10 PP192B2
£4.02

Product Code: PP192B2

Size: H: 192mm L: 425 - 470mm

Old Librex code: PP192B210 and PP192B2100

  • Designed to prolong the life of your books.

  • Made from high quality, flexible PVC.








Description


Clearance item - Limited 'OLD PP CODE' stock available. This item has been replaced with the following 'New Code' Product. Click here for details. Designed to prolong the life of your books, these protective jackets are made from high quality, flexible PVC. Books come in many sizes and we produce a variety of different sized covers to accommodate most sizes. (Please note that customer sizes can be manufactured for quantities of 1000 and above. Please contact us for more information). PLEASE NOTE: All of our sizes are based on paperback books, however all of our jackets can also be used to protect hardback books. Although it is not an 'exact science', hardback books are traditionally thicker than a paperback books. We therefore recommend that you allow an additional 4mm on both the height and the overall width of the jacket required when sizing a jacket to protect a Hardback book. FITTING YOUR JACKET Your Protection Jacket is supplied with two (sometimes three) removable straps. Depending on the overall width of your book you may need to remove one (or two) of the straps. i) Carefully place the front cover into the 'tuck-in' sleeve (the end without the straps). ii) Carefully tuck the back cover of the book under the straps so that the jacket wraps around the outside of the book. iii) Close the book and using the edge of the back cover as a guide, open the back page of the book enough to fold in and crease the tuck-in flap. iv) Once creased the flap can then be easily tucked under the appropriate strap. Unused straps can be remove by carefully tearing them at the weld point.
Description

Details

Clearance item - Limited 'OLD PP CODE' stock available. This item has been replaced with the following 'New Code' Product. Click here for details. Designed to prolong the life of your books, these protective jackets are made from high quality, flexible PVC. Books come in many sizes and we produce a variety of different sized covers to accommodate most sizes. (Please note that customer sizes can be manufactured for quantities of 1000 and above. Please contact us for more information). PLEASE NOTE: All of our sizes are based on paperback books, however all of our jackets can also be used to protect hardback books. Although it is not an 'exact science', hardback books are traditionally thicker than a paperback books. We therefore recommend that you allow an additional 4mm on both the height and the overall width of the jacket required when sizing a jacket to protect a Hardback book. FITTING YOUR JACKET Your Protection Jacket is supplied with two (sometimes three) removable straps. Depending on the overall width of your book you may need to remove one (or two) of the straps. i) Carefully place the front cover into the 'tuck-in' sleeve (the end without the straps). ii) Carefully tuck the back cover of the book under the straps so that the jacket wraps around the outside of the book. iii) Close the book and using the edge of the back cover as a guide, open the back page of the book enough to fold in and crease the tuck-in flap. iv) Once creased the flap can then be easily tucked under the appropriate strap. Unused straps can be remove by carefully tearing them at the weld point.
Size/Product Code

Additional Information

Product Code PP192B2
Size H: 192mm L: 425 - 470mm
Video(s)